high precision copper wire peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as copper wire peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
copper wire peeling machine is one of our main products,Host is composed of a bed, spindle, oil air lubrication system, front clamping feed in, clamp car, rear clamping extracting, front guide, middle guide, rear guide, driving components.The spindle is driven by the main drive through the synchronous belt drive gear box, then drives the cutter head which is equipped with four adjustable cutters to produce the precision and high speed rotation movement. Rod is feed in through the front feeding clamping, and is given a linear and feeding motion. Front guide makes the central location to the bar, and after that, the cutting heads begin to peel the bar on the surface. After peeling, the bar enters to the middle and rear guide part to experiences another central location. The extracting components deliver the after-peeling bar to unloading rollers. That is the brief introduction of the whole production process.
model | WXC100CA | |
material requirement | diameter range (mm) | 26＜dia＜105 |
material length (mm) | ≥2800 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25～50μm | |
finished product | diameter range(mm) | 25≤dia≤101 |
diameter cutting depth(mm) | 1.0~4.0 | |
diameter tolerance | ≤h10 | |
surface roughness (Ra) | ≤6.3μm | |
feeding speed (m/min) | 0.5~8.0 | |
cutting head rotation rate per minute(rpm) | 430~1000 | |
main motor(kw） | 75/95 | |
total capacity（kw） | 95/110 | |
compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
