semi automatic carbon steel wire peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as carbon steel wire peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
carbon steel wire peeling machine is one of our main products,Under the control of signal from detection point, the bar will be clamped tightly by the hydraulic clamp driven synchronously by the car which is supported on slide. It will make synchronous axial movement with the extracting car driven by hydraulic tank controlled by proportional valve to finish the process of bar end peeling. The synchronization system provides the signal by the wheel encoder and controlled by PLC. There is limit switch installed in the end for the operation convenience.
Pneumatic clamping shockproof pressure wheel device is installed at the back of clamping car for automatic centering, and to prevent shaking of bar front end.
diameter range (mm)
material length (mm)
according to GB 702-2004 second group
≤50% of diameter tolerance
diameter cutting depth(mm)
surface roughness (Ra)
feeding speed (m/min)
cutting head rotation rate per minute(rpm)
compressed air (prepared by user)
0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine