CNC carbon steel wire peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as carbon steel wire peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
carbon steel wire peeling machine is one of our main products,4 sets of cutter bar are set, there are 4 in each pair, 12 in all. Every cutter bar equips micromatic setting device, which can set unified dimensions on the tool setter in advance,replacing fast and improving efficiency. Tool feeding can be adjusted through touch screen on hand wheel. Tool blades are round or triangle blades, adopting center-screw blade locking mode.Driven by main electric motor, main spindle rotate at a high speed via synchronous belt, completing processing of elements. Behind the cutter head, chip-blocking plate is installed. So that it can stop chips from coming into spindle. Middle-rear device is installed in spindle from back of main spindle device.
model | WXC80S | |
material requirement | diameter range (mm) | 21<dia<83 |
material length (mm) | ≥2200 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25~50μm | |
finished product | diameter range(mm) | 20≤dia≤80 |
diameter cutting depth(mm) | 0.5~3 | |
diameter tolerance | ≤h9 | |
surface roughness (Ra) | ≤3.2μm | |
feeding speed (m/min) | 1~12 | |
cutting head rotation rate per minute(rpm) | 430~1500 | |
main motor(kw) | 75/90 | |
total capacity(kw) | 95/110 | |
compressed air(prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine |
Certificates
Customer
Exhibition
Packaging