semi automatic black wire peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as black wire peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
Black wire peeling machine is one of our main products, which is mainly used to wipe off remove the rust on the surface of the black wire to make the black wire bright. The frame body is rectangle structure, some part is flat, some part is cant, which is separated structure. Pneumatic kick-out device is installed on top. Materials are loaded by hand. Among which, some thinner materials need to be paved by hand and spread down along the slop,near to the front block. The position of block is adjusted according to material size. The block is adjusted by hand, facilitating the kick-out arm move materials.
diameter range (mm)
material length (mm)
according to GB 702-2004 second group
≤50% of diameter tolerance
diameter cutting depth(mm)
surface roughness (Ra)
feeding speed (m/min)
cutting head rotation rate per minute(rpm)
compressed air (prepared by user)
0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine