semi automatic steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
Semi-automatic steel wire peeler is one of our main products, this peeler consists of main motor, cutting fluid circulation cooling system, chip conveyor, hydraulic system, electrical system, feeding rack ,feeding Roller, unloading Roller and collecting groove.
It is high-efficient specialized lathe to make a rough or fine machining to the surface of steel wire. It is able to not only get rid of the imperfection on the wire surface , de-carburized layer, crack etc, but also to guarantee relatively high accuracy.
|material requirement||diameter range (mm)||6.5＜dia＜31|
|material length (mm)||≥1400|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||6≤dia≤30|
|diameter cutting depth(mm)||0.5~1.0|
|surface roughness (Ra)||≤6.3μm|
|feeding speed (m/min)||1.0~8.0|
|cutting head rotation rate per minute(rpm)||900~2000|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|