high precision stainless steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
High precision stainless steel wire peeler is one of our main products, Roller clamping wheel is supported by spindle and cone roller bearing. Driven by hydraulic cylinder, the upper roller wheel goes down. Through transmission of gear, another roller goes up with slide bar which is fixed on the lower roller axle seat, clamps raw materials that are sent by conveying roller table and transmits materials into cutter head by rolling through guide device, implementing cutting and processing. Power is reduced by speed reducer driven by electric motor, then is transmitted to pressure wheel by hooks coupling universal coupling through transfer case. The pressing roller adopts all self-driven pressing rollers. Hydraulic pressure is presented by pressure gauge which is controlled by the hydraulic regulator, and can be adjusted by manually.
| model | WXC80S | |
| material requirement | diameter range (mm) | 21＜dia＜83 |
| material length (mm) | ≥2200 | |
| yield strength(Mpa) | ≤1100 | |
| surface hardness | ≤HB320 | |
| straightness (mm/m) | ≤1.5 | |
| diameter tolerance | according to GB 702-2004 second group | |
| roundness(mm) | ≤50% of diameter tolerance | |
| surface roughness(Ra) | ≤25～50μm | |
| finished product | diameter range(mm) | 20≤dia≤80 |
| diameter cutting depth(mm) | 0.5~3 | |
| diameter tolerance | ≤h9 | |
| surface roughness (Ra) | ≤3.2μm | |
| feeding speed (m/min) | 1~12 | |
| cutting head rotation rate per minute(rpm) | 430~1500 | |
| main motor(kw） | 75/90 | |
| total capacity（kw） | 95/110 | |
| compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
