CNC stainless steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
CNC stainless steel wire peeler is one of our main products, it can position the raw material from the feeding device accurately and prevent vibration in the peeling process. The front guide locates in the place quite near to the front of cutting head. To realize bar clamping and supporting, the front guide device adopts cam self centering mode. The claw is alloy wheel structured, and each claw can individually performance coaxial center adjustment.4 sets of alloy rollers,8 in all.
To facilitate the tool changing operation, front guide device is designed to be tilting structure.
|material requirement||diameter range (mm)||21＜dia＜83|
|material length (mm)||≥2200|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||20≤dia≤80|
|diameter cutting depth(mm)||0.5~3|
|surface roughness (Ra)||≤3.2μm|
|feeding speed (m/min)||1~12|
|cutting head rotation rate per minute(rpm)||430~1500|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|