CNC ss wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
CNC ss wire peeler is one of our main products, 4 sets of cutter bar are set, there are 6 in each pair, 24 in all. Every cutter bar equips micromatic setting device, which can set unified dimensions on the tool setter in advance，replacing fast and improving efficiency. Tool feeding can be adjusted through touch screen on hand wheel. Tool blades are round or triangle blades, adopting center-screw blade locking mode.
| model | WXC30S | |
| material requirement | diameter range (mm) | 6.5＜dia＜31 |
| material length (mm) | ≥1400 | |
| yield strength(Mpa) | ≤1100 | |
| surface hardness | ≤HB320 | |
| straightness (mm/m) | ≤1.5 | |
| diameter tolerance | according to GB 702-2004 second group | |
| roundness(mm) | ≤50% of diameter tolerance | |
| surface roughness(Ra) | ≤25～50μm | |
| finished product | diameter range(mm) | 6≤dia≤30 |
| diameter cutting depth(mm) | 0.5~1.0 | |
| diameter tolerance | ≤h9 | |
| surface roughness (Ra) | ≤3.2μm | |
| feeding speed (m/min) | 1.0~10.0 | |
| cutting head rotation rate per minute(rpm) | 900~2500 | |
| main motor(kw） | 45 | |
| total capacity（kw） | 65 | |
| compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
