CNC spring steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
CNC spring steel wire peeler peeler is one of our main products, the cutting liquid circulation cooling system is mainly composed of pipe, circulating pump, nozzle etc.
The circulating pump delivers the cutting liquid in the tanks to the nozzle near the cutting head through pipes, and cutting liquid is directly sprayed to the cutter and peeling chip. Most heat generated from the bar peeling is taken away by cooling liquid, which together with the peeling chip, falls down to the chip removal mouth, and flows back to water tank through pipe.
|material requirement||diameter range (mm)||21＜dia＜83|
|material length (mm)||≥2200|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||20≤dia≤80|
|diameter cutting depth(mm)||0.5~3|
|surface roughness (Ra)||≤3.2μm|
|feeding speed (m/min)||1~12|
|cutting head rotation rate per minute(rpm)||430~1500|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|