CNC copper wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as copper wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
copper wire peeler is one of our main products, Under the control of signal from detection point, the bar will be clamped tightly by the hydraulic clamp driven synchronously by the car which is supported on Linear guide rail. It will make synchronous axial movement with the extracting car driven by ball screw powered by driving motor to finish the process of bar end peeling. The synchronization system provides the signal by the wheel encoder and controlled by PLC. There is limit switch installed in the end for the operation convenience. Pneumatic anti shock compression wheel device is installed behind the clamping vehicle. The car is self-centered to avoid the vibration of front end of bar material.
Specification | WXC500C | |
material requirement | diameter range (mm) | 320<dia<510 |
material length (mm) | ≥4500 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25~50μm | |
finished product | diameter range(mm) | 315≤dia≤500 |
diameter cutting depth(mm) | 1.0~10.0 | |
diameter tolerance | ≤h10 | |
surface roughness (Ra) | ≤6.3μm | |
feeding speed (m/min) | 0.05~1.0 | |
cutting head rotation rate per minute(rpm) | 20~160 | |
main motor(kw) | 200 | |
total capacity(kw) | 290 | |
compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine |
Certificates
Customer
Exhibition
Packaging