CNC carbon steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
CNC carbon steel wire peeler is one of our main products, Loading platform is adopted in the loading device, while in unloading device, U shape material groove is used. All touching surface on unloading rack adopts protective measurement . Loading and unloading racks adjust the center height to main machine manually.
The machine is designed and produced in strict accordance with the relevant standards, technical agreements.
model | WXC30S | |
material requirement | diameter range (mm) | 6.5<dia<31 |
material length (mm) | ≥1400 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25~50μm | |
finished product | diameter range(mm) | 6≤dia≤30 |
diameter cutting depth(mm) | 0.5~1.0 | |
diameter tolerance | ≤h9 | |
surface roughness (Ra) | ≤3.2μm | |
feeding speed (m/min) | 1.0~10.0 | |
cutting head rotation rate per minute(rpm) | 900~2500 | |
main motor(kw) | 45 | |
total capacity(kw) | 65 | |
compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine |
Certificates
Customer
Exhibition
Packaging