semi automatic aluminium wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as aluminium wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
aluminium wire peeler is one of our main products,The blade is a triangular blade, which is fixed with a screw. The cutter bar is divided into two kinds of single and double cutter which can meet different material turning requirement.
Driven by main electric motor, main spindle rotate at a high speed via Coupling which connected directly with gear box , completing processing of bar material. The main shaft gear box can shift gears according to the need .Behind the cutter head, chip-blocking plate is installed. So that it can stop chips from coming into spindle. Middle-rear device is installed in spindle from back of main spindle device.
| Specification | WXC500C | |
| material requirement | diameter range (mm) | 320＜dia＜510 |
| material length (mm) | ≥4500 | |
| yield strength(Mpa) | ≤1100 | |
| surface hardness | ≤HB320 | |
| straightness (mm/m) | ≤1.5 | |
| diameter tolerance | according to GB 702-2004 second group | |
| roundness(mm) | ≤50% of diameter tolerance | |
| surface roughness(Ra) | ≤25～50μm | |
| finished product | diameter range(mm) | 315≤dia≤500 |
| diameter cutting depth(mm) | 1.0~10.0 | |
| diameter tolerance | ≤h10 | |
| surface roughness (Ra) | ≤6.3μm | |
| feeding speed (m/min) | 0.05~1.0 | |
| cutting head rotation rate per minute(rpm) | 20~160 | |
| main motor(kw） | 200 | |
| total capacity（kw） | 290 | |
| compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
