semi automatic alloy steel wire peeler
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as wire peeler, Series JY Bar Straightening Machine, Abrasive Belt Grinder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia, Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
Semi-automatic alloy steel wire peeler is one of our main products, When the bar is peeling almost to the end, clamping car automatically fastens it, and synchronously extracts it with front guide component, which guarantees that there is no obvious dent on the bar surface after peeling.
Every tool holder can be made fine adjustment, and it can also be adjusted to a certain number on the tool holder regulator in advance, for the sake of fast replacement to enhance the working capacity.
For the convenience of cutter replacement in the cutting head, the front guide is turn over structured on a whole.
|material requirement||diameter range (mm)||11＜dia＜40|
|material length (mm)||≥1400|
|diameter tolerance||according to GB 702-2004 second group|
|roundness(mm)||≤50% of diameter tolerance|
|finished product||diameter range(mm)||10≤dia≤39|
|diameter cutting depth(mm)||0.5~2.0|
|surface roughness (Ra)||≤6.3μm|
|feeding speed (m/min)||1.0~10.0|
|cutting head rotation rate per minute(rpm)||900~2400|
|compressed air (prepared by user)||0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine|