semi automatic steel tube peeling machine
Yantai Haige Machine Tools Co.,Ltd. was built in 1999,which specializes in producing steel finishing equipment,such as steel tube peeling machine,Series JY Bar Straightening Machine,Abrasive Belt Ginder,Drawing Machine,Shot Blasting Machine,Centerless Grinding Machine,CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience,our machines have been exported to Russia Vietnam,India, Pakistan,Iran,South Korea,North Korea,Taiwan and other countries and regions.
semi automatic steel tube peeling machine is one of our main products,about the processing,the smaller the bending degree of raw material,the better finished product’s precision,and the longer machine service life and higher efficiency.After peeling by the semi-automatic type machine,it could get the better diameter tolerance of the steel tube.It turns the tube surface bright.It’s the special one researched and designed by our engineer to remove the cracks on the surface of the tube at the same time.
Main Technical Parameters:
diameter range (mm)
material length (mm)
according to GB 702-2004 second group
≤50% of diameter tolerance
diameter cutting depth(mm)
surface roughness (Ra)
feeding speed (m/min)
cutting head rotation rate per minute(rpm)
compressed air (prepared by user)
0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine