Metal Straightening Machines

This machine is composed of loading system, straightening main body, unloading or discharging table roller and discharging collective system, with corresponding electronic control, equipment lubrication and cooling system.
Chat Now

Product Details

General Description:

Yantai Haige Machine Tools Co.,Ltd. was built in 1999, which specializes in producing steel finishing equipment,such asalloy steel rod straightening machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine,Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in continuous hard chrome plating equipment and heat treatment equipment.

Based on 15 years manufacture and design experience,our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.

Main Technical Parameters:




Straightening rangemm

tensile strength σb450Mpa

Φ10≤d≤Φ40L ≥2000

tensile strength σb1000Mpa

Φ10≤d≤Φ38L ≥2000

Surface hardness




Diameter tolerance



≤50% of diameter tolerance


Surface roughnessRa

For Bright bar 3.26.3m

Finished product



Diameter tolerance


Surface RoughnessRa


No. Of rollers


Diameter of rollermm


Feeding SpeedStepless Speed Change


Main Motor PowerkW


Lifting Motor PowerkW


Sizem)(for reference

Host machine:5.7X2.0X2.2


weightt)(for reference

Host machine5.8

Total capacitykWfor reference


Compressed air sourceSelf-prepared

0.5~0.8MPa1.8m3/minTwo stage oil water separator is included

Video Link:

Bar Straightening


Series JY straightening machine is mainly used for precision straightening for the metal bar after peeling or granding and pre-straightening for the metal bar.

The machine adopted special curve between upper concave and the lower convex two straightening rolls to realize calendering and straightening at the same time,which greatly improved the working efficiency.

Series JY two-rolls Straightening Machine consists of two-beams and four-columns structure,prestressed structure and frame structure.

bar straightening.jpg


1.Fast feeding and straightening speed,which can reach 10-30m/min.

2.With special carves ,it can straighten and calender materials at the same time.

3.High precision.straighteness can be 0.15-0.4mm/m,surface roughness Ra≤0.8μm.


Main Machine

The upper and lower body respectively install a straightening roller,the upper roller is concave ,the lower roller is convex.

According to the diameter and the material properties of the bar,respectively to adjust upper and lower straightening roller angle,electric lift part adjust the gap between the two straightening rolls,start the cooling lubrication system,driven by main motor,to complete calenderingand straightening at the same time.

Cooling Lubrication System


Cooling lubrications by cooling pump suction,through multiple pipelines from the front spray mozzle to the roll gap and the bar,playing cooling and lubricationing role.After converging,follow together into the coolant tank.Coolant tank design three layer protection filter,to ensure lubricating coolant cleaness.

Electrical System


The transmission system adopts frequency conversion stepless speed regulation,feeding system,adjustment system,cooling and lubricating system controled by AC power.

Entry Guide System and Exhaust System.jpg

The upper and lower cylinders respectively control the upper and lower nylon rollers lifting,meanwhile,two motors drive two nylon rollers rotating.Then clamp the bars entering the entrance of the guide sleeve.
Two nylon rollers clamp the workpieces and asssure the workpiece not easy to slip,reliable work.

Auxiiliary Machine

Automatic loader and unloader,greatly saving labor cost.

After straightening,all the collection racks are equiped with protective layer to avoid any scratches.


Optimum straightening effect, even with high strength materials
Straightener roll from alloyed and hardened chrome steel

Two-roll principle with concave upper roller and convex bottom roller to ensure that the ends are straightened

Lateral guidance of the bar to be straightened between the straightener rolls by special guide ledges

Long striaghtening roller life due to coolant lubrication

Packaging Show

Packaging Detail:

The first layer

wrapping with foam film and stretch film for the special components, in order to avoid moisture.

Second layer

inside of plywood box, adopting small square plywood block and strapping belt to fix.

Third layer

the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.

Fourth layer

in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.

Outside wooden case with export fumigation

Export packiing


Company profile

Company Profile:

Yantai Haige Machine Tools Co.,Ltd was built in 1999,which specializes in producing steel finishing equipment,such as series WXC Centerless Lathe(Bar Peeling Machine),Series JY Bar Straightening Machine,Abrasive Belt Grinder(Belt Sander Polishing Machine),Drawing Machine,Shot Blasting Machine,Centerless Grinding Machine,CNC Skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in plating equipment and heat treatment equipment.


Based on 15 years manufacture and design experience,our machines have been exported to Russia,Vietnam,India,Pakistan,South Korea,North Korea,Taiwan Province and other countries and regions.

Factory real landscape:

Processing Machinery


Accessories Area


Administrative Area


We regard customer's satisfaction as our unremitting pursuit.


About our service

About Our Service:

A.Warranty period:1 year except for fast-wearing parts.

B.Immediate response when get informed of machine problem.

C.The machine operators of buyer's can be trained in our factory for free.

D.Provide long term free technical support.

E.If necessary,we can dispatch our well-trained and professional engineers to our customer's factories to help them with the machine installation and commissioning.

F.Customized design is available.OEM&ODM are welcomed.



Bright steels,Non-ferrous metals such as copper,titanium,magnesium,aluminum,Fasteners,

Auto parts,Springs,Hydraulics,Bearings,Machining.

Helen .jpg


FAQ.jpg Q&A

1.Are you manufacturer or trading company?

We are professional manufacturer and we have more than 10 years experience in this field.We have our own factory.

Besides,at the end of 2014,we was just estabilished a trading company.

2.How many employees are there in your factory?

Approximately 150 persons.

3.Do you have your own R&D team?How many design engineers do you have?

Yes,we have our own R&D team.More than 10 persons.

4.Which countries have your machines been exported to now?

Russia,South Korea,North KOrea,Pakistan,India,Vietnam,Taiwan,etc.

We regard our customer's satisfaction as our unremitting pursuit.

Contact Information:

contact 最终_副本

Hot Tags: metal straightening machines, manufacturers, high speed, high precision, high accuracy, high quality


You Might Also Like