About the quality of the horizontal vertical straightening machine,after straightening,its straightness can be up to 0.15-0.4mm/m,and its roughness is less than 1μm.As for the packaging way,a very convenient way of transportation is adopted by us.And its cost is low.During the process of transportation and packaging,we always take multi protection ways for that.Firstly,it will be wrapped with one strength film outside to prevent the moisture,then one plywood box inside adopted.Then the machine is fixed tightly on the bottom of the plywood box,as well as the compact layout in the container,and lastly,then reinforcing again to against the shaking inside the container.The customers can make sure that our machine can be packaged well.
model | JY130Z | ||
Raw Material | Straightening range（mm）(not drawing material) | Yield strength σb≤450（Mpa） | Φ35≤d≤Φ120（L ≥3000） |
Yield strength σb≤1000（Mpa） | Φ35≤d≤Φ110（L ≥3000） | ||
Surface hardness | ≤HB320 | ||
straightness（mm/m） | ≤3 | ||
Diameter tolerance | ≤h10 | ||
Roundness | d≤50 | ≤50% of diameter tolerance
| |
50<d≤80 | ≤65% of diameter | ||
d>80 | ≤70% of diameter | ||
Surface roughness（Ra） | ≤3.2～6.3mm | ||
Finished product | straightness（mm/m） | ≤0.40 | |
Diameter tolerance | ≤h10 | ||
Surface Roughness（Ra） | Peeled material ≤0.8μm | ||
No. Of rollers | 2 | ||
Diameter of roller（mm） | Φ460 | ||
Feeding Speed（Stepless Speed Change） | 2~10（m/min） | ||
Main Motor Power（kW） | 90X2 | ||
Lifting Motor Power（kW） | 5.5 | ||
Size（m）（for reference） | Host machine:11X3.4X4.3
| ||
weight（t）（for reference） | Host machine:42 | ||
Total capacity（kW）（for reference） | 200 | ||
Compressed air source（Self-prepared ） | 0.5~0.8MPa、1.8m3/min、Two stage oil water separator is included | ||
Certification
Customer
Exhibition
Packaging
