About the quality of the horizontal vertical straightening machine,after straightening,its straightness can be up to 0.15-0.4mm/m,and its roughness is less than 1μm.As for the packaging way,a very convenient way of transportation is adopted by us.And its cost is low.During the process of transportation and packaging,we always take multi protection ways for that.Firstly,it will be wrapped with one strength film outside to prevent the moisture,then one plywood box inside adopted.Then the machine is fixed tightly on the bottom of the plywood box,as well as the compact layout in the container,and lastly,then reinforcing again to against the shaking inside the container.The customers can make sure that our machine can be packaged well.
model | JY160AY | ||
Material | Straightening range(mm) | tensile strength σb≤450(Mpa) | Φ50≤d≤Φ150(L ≥3000) |
tensile strength σb≤1100(Mpa) | Φ50≤d≤Φ140(L ≥3000) | ||
Surface hardness | ≤HB380±10 | ||
straightness(mm/m) | Bright ≤3 Black<6 | ||
Diameter tolerance | Bright:≤IT10 Black:≤0.5 | ||
Roundness | ≤50% of diameter tolerance | ||
Surface roughness(Ra) | Bright≤6.3mm; Black:≤12.5mm | ||
Finished product | straightness(mm/m) | Bright:≤0.50; Black:≤1.5(Data is the measured value minus the roundness deviation; straightness at both ends of the rod and oversized or undersized diameter ≤ 2.0mm / m)) | |
Straightness Measure Method | Platform Feeler | ||
Diameter tolerance | Bright≤IT10; Black:Improved | ||
Surface Roughness(Ra) | Bright≤0.8μm Black:Improved | ||
No. Of rollers | 2 | ||
Diameter of roller(mm) | Φ550 | ||
Feeding Speed(Stepless Speed Change) | 2-10(m/min) | ||
Main Motor Power(kW) | 160*2 | ||
Lifting Motor Power(kW) | 7.5 | ||
Size(m)(for reference) | Host machine:1263X4656X4625
| ||
Total capacity(kW)(for reference) | 340 | ||
Compressed air source(Self-prepared ) | 0.5~0.8MPa、1.8m3/min、Two stage oil water separator is included |
Certification
Customer
Exhibition
Packaging