20 Tons Per Hour Steel Tmt Bar Rebar Deformed Bar Iron Rods for Construction Rolling Mill ...

20 Tons Per Hour Steel Tmt Bar Rebar Deformed Bar Iron Rods for Construction Rolling Mill ...

The straightening effect is not achieved through the cross bending from the rolls to create the plastic deformation of the bar and eventually the straightening condition, but through the curvature variation from a pair of roll bending.

Product Details

We always do the job to be a tangible group making sure that we can provide you with the top top quality as well as ideal value for Metal Tube Peeling Machine, Steel Rod Peeling Machine, CNC Bearing Steel Wire Peeling Machine. We have always insisted on taking science and technology as the forerunner, and professionalism as the driving force. Continuous improvement is our self-discipline. In the development of our company, we try our best to provide competitive treatment for our employees and make greater tax contribution for the local area. We actively assume social responsibility and strive to integrate CSR construction into the whole process of the company's business development.

tmt bar straightening machine

General Description:

Yantai Haige Machine Tools Co.,Ltd. was built in 1999, which specializes in producing steel finishing equipment, such as tmt bar straightening machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine,Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc.We also engage in continuous hard chrome plating equipment and heat treatment equipment.

Based on 15 years manufacture and design experience,our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.

 

Specific Description:

tmt bar straightening machine

Straightening principle:

The working principle of two roll straightening machine is a special form of the theory of cross roll straightening. The straightening effect is not achieved through the cross bending from the rolls to create the plastic deformation of the bar and eventually the straightening condition, but through the curvature variation from a pair of roll bending. The diameter and curvature of the straightening roller are obtained from the experience getting from the computer simulation home and abroad. Its principle is like this: The processing bar moves rotating forwards in the condition of bending, which makes every section of bar material experience tensile and compressive plastic deformation to achieve the purpose of unifying the internal stress of the material. The roll gap must guarantee the bar to be delivered in smoothly, then the Original bending degree is to be unified according to the equal curvature of the waist of the roller during the rotating feeding of bar material, thus all the original bending degree achieve the same level, and at last straighten the bar in the exit side of the roller. This series of straightening machine design uses a vertical two roller structure with the advantage of concise structure, reliable strength, convenient operation, and high efficiency.  The design of the multi - roll gap curve can ensure the straightening of the bar with different diameters and materials. At the same time, the contact area between the roller and the material is ensured to get a reliable roll polishing effect.


6-产品描述图片.jpg

5-产品描述图片.jpg


model

WXC100S

material requirement

diameter range (mm)

26<dia<105

material length (mm)

≥2800

yield strength(Mpa)

≤1100

surface hardness

≤HB320

straightness (mm/m)

≤1.5

diameter tolerance

according to GB 702-2004 second group

roundness(mm)

≤50% of diameter tolerance

surface roughness(Ra)

≤25~50μm

finished product

diameter range(mm)

25≤dia≤100

diameter cutting depth(mm)

1.0~4.0

diameter tolerance

≤h9

surface roughness (Ra)

≤3.2μm

feeding speed (m/min)

0.5~10

cutting head rotation rate per minute(rpm)

430~1200

main motor(kw)

90

total capacity(kw)

120

compressed air (prepared by user)

0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine


Certificates

9-证书.jpg


Customer

10-客户.jpg


Exhibition

11-展会.jpg


Packaging

12-包装.jpg




In order to adapt to the development and requirements of the market, we intensified our research and launched new series of 20 Tons Per Hour Steel Tmt Bar Rebar Deformed Bar Iron Rods for Construction Rolling Mill ... in line with customer needs. We hope to win the favor of consumers and the appreciation of colleagues in the industry with excellent quality and excellent service. Our core values are: less empty talk, more practical work.
Hot Tags: TMT bar straightening machine, manufacturers, high speed, high precision, high accuracy, high quality, CNC Centerless Grinding Machine, Ss Tube Straightener, CNC Ss Bar Peeling Machine, Bar-bar Finishing Line, Copper Wire Peeling Machine, Semi Automatic Titanium Rod Peeling Machine

Inquiry

You Might Also Like