CNC brass rod peeling machine
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as brass rod peeling machine, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
Brass rod peeling machine is one of our main products, which is used to wipe off the the surface crack, oxide layer and decarburized layer of the brass rod. A hydraulic clamping mechanism is designed for the leading device, which can effectively avoid scratches of materials. The operation of whole set of machine is controlled by 2 set of control system of touch screen and button station. The key part PLC is programmed controlled with multi-point detection mechanism which is highly automated.
model | WXC130C | |
material requirement | diameter range (mm) | 35＜dia＜130 |
material length (mm) | ≥2800 | |
yield strength(Mpa) | ≤1100 | |
surface hardness | ≤HB320 | |
straightness (mm/m) | ≤1.5 | |
diameter tolerance | according to GB 702-2004 second group | |
roundness(mm) | ≤50% of diameter tolerance | |
surface roughness(Ra) | ≤25～50μm | |
finished product | diameter range(mm) | 35≤dia≤125 |
diameter cutting depth(mm) | 1.0~5.0 | |
diameter tolerance | ≤h10 | |
surface roughness (Ra) | ≤6.3μm | |
feeding speed (m/min) | 0.2~3.0 | |
cutting head rotation rate per minute(rpm) | 110~660 | |
main motor(kw） | 90 | |
total capacity（kw） | 115 | |
compressed air (prepared by user) | 0.5~0.8MPa,1.8m3/min,0.8 m3 up air tank with two stage oil water separator and compressed air freezing type drying machine | |
Certificates
Customer
Exhibition
Packaging
