Chromium Electroplating Equipment
Yantai Haige Machine Tools Co., Ltd. Was built in 1999, which specializes in producing steel finishing equipment, such as chromium electroplating equipment, Series JY Bar Straightening Machine, Abrasive Belt Ginder, Drawing Machine, Shot Blasting Machine, Centerless Grinding Machine, CNC skiving and Roller Burnishing Machine and Auxiliary Machine etc. We also engage in continuous hard chrome plating equipment and heat treatment equipment.
Based on 15 years manufacture and design experience, our machines have been exported to Russia Vietnam, India, Pakistan, Iran, South Korea, North Korea, Taiwan and other countries and regions.
The equipment is used for multi-layer hard chromium plating on the outer surface of round rod material (slender axis), with a front automatic feeding device, a pre-treatment device, a automatic unloading device, and a chromium acid mist recycle device.
The system is energy-saving and environmental-friendly. The waste water contains no chromium, and the clean water still flows into the mother groove to supply the vacancy. Both the electroplating groove and the circulating groove draw air into the chromium mist recovery and purifying separation unit, and the intercepted chromium mist and clean water are reintroduced into the mother groove. The chromium acid mist recycle device discharges no pollutants.
The distance between the work-piece and the anode is small. And the work-piece passes through the counterfeit anode and rotates at a constant speed, so the uniformity of the electroplating layer is better both in the circumference and in the axial direction.
Product Name: Round Bar(slender shaft)
Product Material: 45#，42CrMo .
Diameter Range: φ20mm~φ50mm;φ40mm~φ70mm;φ7mm~φ100mm
Length Range: ＞4000mm
Product Quality before Plating: Surface Roughness: Ra0.2--0.8; Straightness: 0.1/1000
Plating Speed: 0 - 12m/h (according to customer's plating thickness requirements)
Maximum Feeding Speed: 35m/h