CNC horizontal and vertical machining center has many advantages and can be widely used in the fields of mechanical manufacture,chemical engineering,automobile,steamer ship etc.
The Main Specifications:
1 Good Structural Rigidity
1.1 Adopt high-strength low-stress cast iron materials and resin sand casting technology for bed, column, bed saddle, spindle box, work table, etc. And after twice of manual aging treatment, it has good stability, high strength and stable and reliable accuracy.
1.2 Adopt large span rail layout and precision grinding on the rail mounting surface, with high combined rigidity, and stability precision.
2 The Main Drive
2.1 The machine adopts direct connection between the digital AC spindle servo motor and spindle. The transmission gap is small, with low noise and high precision. The maximum speed of a standard spindle is 20000rpm.
2.2 The spindle components are provided by the professional producers in Taiwan, and the bearing brand is reputed. The spindle is carefully assembled in a constant-temperature plant through over 4h of temperature rise running test at the highest speed, as well as precision dynamic balance correction, to ensure its high-quality.
2.3 The spindle adopts a closed grease lubrication system which is running smoothly. It can also prevent the intrusion of air dust and chip fluid in order that the spindle bearing works in a contamination-free environment.
2.4 equipped with oil cooler, circulating cooling can be adopted to the spindle sleeve to control the spindle temperature rise, effectively protect of the spindle components and extend the spindle life.
3 Feed Drive
3.1 The feed drive system adopts direct link between all-digital AC servo motor and ball screw by coupling to reduce the transmission stages and improve response speed of the movement. The couplings are imported, with high strength and small inertia, to reduce the rotation inertia.
3.2 The ball screws are imported original Taiwan high-precision C3 screw (X, Y screw φ28 mm, Z screw φ30 mm); it is equipped with imported precision lock nut and flexible coupling, and it is reasonably pre-stretched before installation to eliminate errors in assembly.
3.3 All the three feed shafts adopt high-precision laser interferometer after assembly which can accurately measure the transmission link error and make compensation for the screw pitch and clearance in the system so that the shafts move their positions more accurately to ensure the accuracy of positioning and repeated positioning.
3.4 The three-way feed applies linear guide rail (width 30 mm). The rail span is large, taking into account the carrying capacity and making the machine response speed better.
Name | Unit | Specification | Remarks |
Workbench area (length × width) | mm | 800×800 | |
Form of work surface (threaded hole) | mm | 24 X M16 | |
Number of work stations | pc | 1 | |
Workbench minimum index unit | degree | 1°X 360 | |
Workbench maximum load bearing | kg | 1500 | |
Worktable maximum turning diameter | mm | ¢1600 | |
Workbench lateral stroke (X) | mm | 1300 | |
Headstock vertical travel (Y) | mm | 1000 | |
Worktable longitudinal stroke (Z) | mm | 1000 | |
Spindle end to table center distance | mm | 200~1200 | |
Spindle center line to work surface distance | mm | 120~1120 | |
Main motor power (AC) | kW | 15/18.5 | |
Main motor torque (AC) | Nm | 143/235 | |
Maximum spindle speed | r/min | 6000 | |
Spindle taper | 7:24 ISO50 | ||
Shank form | BT50(MAS403) | ||
Rivet | P50T-1 | ||
Fast moving speed: (X/Y/Z) | m/min | 24 | |
Fast moving speed: (B) | r/min | 10 | |
Tool magazine capacity | pc | 24 | |
Tool selection | At will | ||
Tool change time (knife-knife) | Sec | 3 | |
Tool weight | kg | 18 | |
Maximum tool diameter for adjacent tool positions | mm | Φ112 | |
Maximum length of tool | mm | 350 | |
Positioning accuracy (IS0 standard) (X/Y/Z) | mm | 0.014 | |
Repeat positioning accuracy (IS0 standard) (X/Y/Z) | mm | 0.01 | |
Positioning accuracy (IS0 standard) (B) | mm | 12″ | |
Repeat positioning accuracy (IS0 standard) (B) | mm | 6″ | |
Machine weight | kg | 14000 | |
Machine tool dimensions (length × width × height) | mm | Approx 3900×3500×3700 |
Certificates
Customer
Exhibition
Packaging