centerless peeling lathe machine for steel round bar
Model | WXC40CA | |
Material | Diameter Range（mm） | Φ8~Φ36X2200~unlimited |
Yield Strength σb（Mpa） | ≤1100 | |
Surface Hardness | ≤HB320 | |
Original Curvature FEFEFEFEFCCCCCCIFJEICurvature（mm/m） | ≤1 .5① | |
Diameter Tolerance | According to GB 702-88, 2 group | |
Roundness | ≤50% of the diameter tolerance | |
Surface Roughness（Ra） | ≤25～50mm | |
After Peeling | Diameter Range（mm） | Φ7~Φ35 |
Diameter Cutting Depth（mm） | 0.20~1.50 | |
Diameter Tolerance | ≤h10 | |
Surface Hardness（Ra） | ≤6.3μm | |
Curvature（mm/m） | The same as material | |
Roundness | ≤0.03 | |
Feeding Speed（Stepless speed regulation m/min） | 1.0~10.0（high strength, high hardness, feeding speed must be reduced to treat large diameter material） | |
Cutting Head Rotational Speed（rpm）（r/min） | 450~1500 | |
Main Motor Power（kW） | 30/45 | |
Feeding Motor Power（kW） | 4（feeding in） +0.55（extracting） | |
Size（m）（for Reference） | Main Machine 2.5X2.2X1.5 , whole machine (with racks ):12.5X2.2X1.5 | |
Weight（t）（with racks for Reference） | 7.0 | |
Total Capacity（kW） | 45/60 | |
Compressed Air Source（Self-prepared） | 0.5~0.8MPa、1.8m3/min、0.8 m3 and above air tank、 2 grade oil&water separator | |
1. Are you manufacturer or Trading Company?
We are professional manufacturer and we have more than 10 years experience in this fiel. We have our own factory. Besides, at the end of 2014, we was just estalished a trading company.
2. How many employees are there in your factory?
Approximately 150 persons.
3. Do you have your own R&D team? How many design engineers do you have?
Yes, we have our own R&D team. More than 10 persons.
4. Which countries have your machines been exported to now?
Russia, South Korea, North Korea, Pakistan, India, Vietnam, Taiwan,etc.
we have much experience in exporting transportation packaging.
Taking multi protection measures:
The first layer
wrapping with foam film and stretch film for the special components, in order to avoid moisture.
Second layer
inside of plywood box, adopting small square plywood block and strapping belt to fix.
Third layer
the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
Fourth layer
in a container, by compact layout, reducing the gap between boxes to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.
Compared with ordinary lathe
1. Ordinary lathe has great restriction for processing long shaft.
Centerless lathe can process the bar of infinite length in theory.
2. Centerless lathe can process not only bars, but also wire rod, including wire rod to wire rod, and wire rod to bar.
3. The working efficiency of centerless lathe is dozens of the ordinary lathe, its processing speed is 1~12m/min.
4. High precision. After peeling, the tolerance of diameter reach≤IT9, surface roughness≤6.3μm.
After-sale Service System
1. Free quality guarantee period for 12 months
2. Free long-term technical support
3. Free train for buyer's operator in our factoty
4. Fast response service within 24 hours
5. Our engineers can offer overseas service, including guiding intallation, commissioning, training, etc.
Any question , please feel free to ask me .
