Series WXC Peeling machine is a high-efficiency lathe which is specialized in processing the surface of steel round bar and steel wire rod, for example, straightening, peeling, cutting and polishing, etc.
Not only quickly remove surface hardened layer, cracks and other defects, but also can get high precision.
During processing, the bar doesn’t rotate itself. The cutting tools rotates at high speed to peel the surface of the bar. At the same time, after peeled , the bar keeps walking forward.
Shapes of Workpiece are requested long steel round bar and steel wire rod.
JUST FOR REFERNCE
Raw Material Length(mm)
Tensile Strength (Mpa)
According to GB 702-2004 second group
≤50% of the diameter tolerance
Unilateral Cutting Depth（mm）
≤IT9（standard tolerance grade）
Feeding Cutting Speed（m/min）
0.5~5 (for continuous chips and high strength and hardness should reduce the speed）
Cutter Head Rotational Speed(rpm)
Main Machine Motor Power(KW)
Auxiliary Machine Motor Power(KW)
7.5（clamping and feeding）+7.5(Carriage part）
Main Machine Outline Dimensions
4.4m X 3.0m X 2.5m
Full Set Machine Outline Dimensions
(including auxiliary machine)
16m X 3.2m X 2.2m
Main Machine Weight
(including auxiliary weight) (T)
Compressed Air Source
(user prepare by themselves）
0.5-0.8Mpa,1.8m3/min,0.8m3 gasholdertwo-stage oil-water separator and compressed air freezing drier
Hot Tags: aluminum lathe peeling machine for bar or cylinder, manufacturers, high speed, high precision, high accuracy, high quality