CNC steel bar peeler
CNC steel bar peeler is mainly used in steel industry. Its finished bar can be processed then used in wide industries, like fasteners, auto parts, springs, hydraulics, bearings and machining parts. It is an important step in steel industry. Also due to its environment -friendly with scraps no wasted and recycled, it is more welcomed than other grinding machine . Fast speed , low noise, easy to handle with CNC system which help clients save much cost.
Main Technical Parameters—XF-WXC100S
Specification | WXC100S | |
RAW | Diameter Range(mm) | Φ26~Φ105 |
Raw Material Length(mm) | ≥2800 | |
Tensile Strength (Mpa) | ≤900 | |
Surface Hardness | ≤HB320 | |
Curvature(mm/m) | ≤1.50 ① | |
Diameter Tolerance | According to GB 702-2004 second group | |
Roundness(mm) | ≤50% of the diameter tolerance | |
Surface Roughness(Ra) | ≤25~50mm | |
FINISHED | Diameter Range | Φ25~Φ100 |
Unilateral Cutting Depth (mm) | 0.25~2 | |
Diameter Tolerance | ≤h9(standard tolerance grade) | |
Surface Roughness(Ra) | ≤3.2μm | |
Roundness(mm) | ≤0.04 | |
Feeding Cutting Speed(m/min) | 4~12(for continuous chips and high strength and hardness should reduce the speed) | |
Cutter Head Rotational Speed(rpm) | 400~1600 | |
Host Machine Motor Power(KW) | 90 | |
Auxiliary Machine Motor Power(KW) | 15(clamping and feeding)+0.75(Carriage) | |
调刀电机(KW) | 3.5 | |
Host Machine Outline Dimensions | 4.4m X 3.2m X 2.5m | |
Full Set Machine Outline Dimensions | 16m X 3.2m X 2.5m | |
Host Machine Weight | 13.5 ( 20.2) | |
Total Capacity(KW) | 140 | |
Compressed Air Source | 0.5-0.8Mpa,1.8m3/min、0.8m3 gasholder、two-stage oil-water separator and compressed air freezing drier. |
Certificates
Customer
Exhibition
Packaging