semi automatic stainless steel bar peeler
Semi automatic stainless steel bar peeler is widely used in stainless steel industry . It can process stainless steel bar with diameter: φ5-φ500. It can wipe off bar surface defects , like cracks , able the peeled bar enter next procedure. Machine consists of bed, spindle, air/oil lubrication system, front-clamping feeding system, rear-clamping extracting system, front guide and middle-rear guide system, etc.It is also environment friendly and scraps can be reused. Its noise level is also small than ordinary machine .
Main Technical Parameters—WXC100C
Specification | WXC100C | |
RAW | Diameter Range(mm) | Φ25~Φ100 |
Raw Material Length(mm) | ≥3000 | |
Tensile Strength (Mpa) | ≤1100 | |
Surface Hardness | ≤HB320 | |
Curvature(mm/m) | ≤1.50 | |
Diameter Tolerance(mm) | According to GB 702-2004 second group | |
Roundness(mm) | ≤50% of the diameter tolerance | |
Surface Roughness(Ra) | ≤25~50mm | |
FINISHED | Diameter Range | Φ24~Φ98 |
Unilateral Cutting Depth(mm) | 0.5~1.5 | |
Diameter Tolerance | ≤IT9(standard tolerance grade) | |
Surface Roughness(Ra) | ≤6.3μm | |
Roundness(mm) | ≤0.04 | |
Feeding Cutting Speed(m/min) | 0.5~5 (for continuous chips and high strength and hardness should reduce the speed) | |
Cutter Head Rotational Speed(rpm) | 240~670(Six Poles) | |
Main Machine Motor Power(KW) | 90 | |
Auxiliary Machine Motor Power(KW) | 7.5(clamping and feeding)+7.5(Carriage part) | |
Main Machine Outline Dimensions | 4.4m X 3.0m X 2.5m | |
Full Set Machine Outline Dimensions | 16m X 3.2m X 2.2m | |
Main Machine Weight | 13.5 (20.0) | |
Total Capacity(KW) | 125 | |
Compressed Air Source | 0.5-0.8Mpa,1.8m3/min,0.8m3 gasholdertwo-stage oil-water separator and compressed air freezing drier |
Certificates
Customer
Exhibition
Packaging