CNC stainless steel bar peeler
CNC stainless steel bar peeler is Yantai Haige Machine Tools Co.,ltd from China main product. It can process 304,316L, 316Ti, 347, 321, all Austenitic and Ferritic grade.etc. Compared ordinary lathe, it can process over -length bar and has high speed . It can turn the black carbon steel bar to bright carbon steel bar With Siemens system , CNC carbon steel bar peeler reduce the requirement on operator machine adjusting skills .
MODEL | WXC130S | |
Raw material | Diameter Range(mm) | Φ45~Φ130 |
Raw Material Length(mm) | ≥2800 | |
Tensile Strength(Mpa) | ≤1100 | |
Surface Hardness | ≤HB320 | |
Curvature(mm/m) | ≤1.50 | |
Diameter Tolerance | According to GB 702-2004 second group | |
Roundness(mm) | ≤50% of the diameter tolerance | |
Surface Roughness(Ra) | ≤25-50μm | |
Finished products | Diameter Range | Φ44~Φ129 |
Unilateral Turning Depth (mm) | 1~2.5 | |
Diameter Tolerance | ≤h9 (standard tolerance grade) | |
Surface Roughness(Ra) | ≤3.2μm | |
Curvature(mm/m) | ≤1.5 | |
Roundness(mm) | ≤0.03 | |
Feeding Cutting Speed(m/min) | 0.3--6 (for continuous chips and high strength and hardness should reduce the cutting speed) | |
Cutter Head Rotational Speed(rpm) | 240-670 (Six poles) 360-1000 (Four poles) | |
Main Machine Motor Power(KW) | 110 | |
Auxiliary Machine Motor Power(KW) | 11(feeding part) | |
Main Machine Outline Dimensions | 5.3 X 3.5 X 3 | |
Full Set Machine Outline Dimensions | 18M X 3.5M X 3M | |
Main Machine Weight | 20.5 (29) | |
Total Installed Capacity(KW) | 130 | |
Compressed Air Source | 0.5~0.8MPa、1.8m3/min、more than 0.8 m3 gasholder, two-stage oil-water |
Certificates
Customer
Exhibition
Packaging