high precision carbon steel bar peeler
High precision carbon steel bar peeler is multi-tool centerless lathe (turning machine)used in bright bar industry. It can turn the black carbon steel bar to bright carbon steel bar . It can process φ5-φ500mm carbon steel bar by erase surface defects . Compared ordinary lathe, it can process over -length bar and has high speed . It is also environment friendly and scraps can be reused. Its noise level is also small than ordinary machine .
Main Technical Parameters-WXC30S
Specification | WXC30S | |
RAW | Diameter Range(mm) | Φ6~Φ32 |
Tensile Strength (M pa) | ≤1000 | |
Surface Hardness | ≤HB320 | |
Curvature(mm/m) | ≤1.50① | |
Diameter Tolerance | According to GB 702-2004 second group | |
Roundness(mm) | ≤50% of the diameter tolerance | |
Surface Roughness(Ra) | ≤25~50μm | |
FINISHED | Diameter Range | Φ5.5~Φ30 |
Unilateral Cutting Depth(mm) | 0.20~1 | |
Diameter Tolerance | ≤h9 (standard tolerance grade) | |
Surface Roughness(Ra) | ≤3.2μm | |
Roundness(mm) | ≤0.03mm | |
Feeding Cutting Speed(m/min) | 1.0--12 (for continuous chips and high strength and hardness should reduce the speed) | |
Cutter Head Rotational Speed(rpm) | 900~2500(Four Poles) | |
Main Machine Motor Power(KW) | 45 | |
Auxiliary Machine Motor Power(KW) | 4(feeding part)+0.55(discharging part) | |
Main Machine Outline Dimensions | 2.5 x 2.2 x1.5 (for reference ) | |
Full Set Machine Outline Dimensions | 12m X 2.2m X 1.5m | |
Main Machine Weight | 3.5 (6) | |
Total Capacity(KW) | 56 | |
Compressed Air Source | 0.5-0.8Mpa,1.8m3/min、0.8m3 gasholder、two-stage oil-water separator |
Certificates
Customer
Exhibition
Packaging