CNC aluminium bar peeler
CNC aluminium bar peeler is manufactured by Yantai Haige Machine Tools Co.,Ltd . It can peel aluminium bar by CNC system , online tools adjusting to change bar cutting depth and precision without stopping machine first. Our bearings uses SKF, electric system uses Siemens , Schneider. Other parts use famous brands in China or appointed by clients. Our CNC Titanium bar peeler can peelφ5-φ500 bar , with speed up to 30m/min , diameter tolerance h9.
Main Technical Parameters—WXC80S
Specification |
WXC80S |
|
RAW |
Diameter Range(mm) |
Φ21~Φ82 |
Raw Material Length(mm) |
2200~6000 |
|
Tensile Strength (M pa) |
≤1100 |
|
Surface Hardness |
≤HB320 |
|
Curvature(mm/m) |
≤1.50① |
|
Diameter Tolerance |
According to GB 702-2004 second group |
|
Roundness(mm) |
≤50% of the diameter tolerance |
|
Surface Roughness(Ra) |
≤25~50μm |
|
FINISHED |
Diameter Range |
Φ20~Φ80 |
Unilateral Cutting Depth(mm) |
0.25~1.5 |
|
Diameter Tolerance |
≤IT9 (standard tolerance grade) |
|
Surface Roughness(Ra) |
≤3.2μm |
|
Roundness(mm) |
≤0.03mm |
|
Feeding Cutting Speed(m/min) |
3.0-11.0(for continuous chips and high strength and hardness should reduce the speed) |
|
Cutter Head Rotational Speed(rpm) |
400~1600(Four Poles) |
|
Main Machine Motor Power(KW) |
90 |
|
Auxiliary Machine Motor Power(KW) |
11(feeding part)+1.5(discharging part) |
|
Main Machine Outline Dimensions |
3.9m X 3.5m X 2.4m |
|
Full Set Machine Outline Dimensions |
16m X 6.1m X 2.4m |
|
Main Machine Weight |
10 (13) |
|
Total Capacity(KW) |
120 |
|
Compressed Air Source |
0.5-0.8Mpa,1.8m3/min、0.8m3 gasholder、two-stage oil-water separator |
Certificates
Customer
Exhibition
Packaging